|
BlackBerry 6210 - Holder with Tilt Swivel
|
This Holder tilts/angles 15 degrees for optimal viewing. It is a high quality custom made holder with a neat and discreet design. It keeps your device in an upright position for better reception. Easily slide your device in/out of the holder. No more fumbling around for your device. Provides for safer driving when viewing, accessing and operating your device in your vehicle.
 |
Product Info |
 |
|
 |
|
 |
How to Install |
 |
|
|
|
Compatibility |
|
|
|
|
|
|
| Note: This Holder fits with many BlackBerry phones. The phone in the picture illustrates the fit of the phone in the Holder and may not look exactly like yours. |
|
|
| This Holder is custom made to fit your phone and works with the standard battery size. It has grooves in the inside walls matching the thickness of the phone. The phone slides in/out of the Holder. The Holder can be used with cigarette lighter cables and headsets, and it has a hook on the right side where you can hang your charging cable or headset when not in use. (Note: The hook is not shown in the overview picture) The Holder is made of heat and cold resistant ABS plastic. |
|
|
|
About Our Tilt Swivel |
 The Tilt Swivel on the back of the Holder can tilt 15 degrees in any direction and swivel 360 degrees. The Tilt Swivel provides easy adjustment of your handhelds position for better viewing, and extends the Holder from the Mount by 20mm / 0.78in. You can also adjust the Holder to avoid unnecessary light reflection. (The Holder shown in the picture to the left is attached to a demo ProClip Mount) |
|
 The Tilt Swivel Base Plate on the back of the Tilt Swivel can be attached to any flat surface or mounting brackett. The base plate comes with 6 pre-drilled holes; 2 holes in a center line and 4 holes in an almost square like pattern to accommodate the AMPS hole pattern. Enclosed in the packaging are 4 self tapping screws and 4 machine screws with nuts. Dimensions of base plate: 50mm/1.96inches x 42mm/1.65inches. The 4 holes in the corners have a diameter of 4 mm, and the self tapping screw holes in the center have a diameter of 3 mm. |
|
|
Keep two devices on the same mount or use one at a time |
 If you have two devices you would like to have next to each other on your dashboard you may be able to have them on the same mount as shown in the General Picture to the left, by using our Horizontal Extension Plate.
You can also move a device/holder from car to car (mount to mount) or switch between to devices/holders on the same mount by using our Move Clip System. Please see the product category, Mounting Options, to the left to learn more about these options. |
|
Keep all your devices on the dashboard |
|
| If you have more than one device you would like to have on your dashboard, we may have the solution. Usually we have 2 or more mounts for each vehicle model so you can have all your devices securely attached on your dashboard. Many of todays customers order two or more mounts and holders - usually one for their mobile phone and one for their Handheld and/or Music Player like the General Picture below illustrates. |
|
 |
|
|
| Make |
Model |
| BlackBerry |
6210 |
| BlackBerry |
6230 |
| BlackBerry |
6280 |
| BlackBerry |
6510 |
| BlackBerry |
7210 |
| BlackBerry |
7230 |
| BlackBerry |
7250 |
| BlackBerry |
7280 |
| BlackBerry |
7290 |
| BlackBerry |
7510 |
| Nextel |
BlackBerry 6510 |
|
|
 |
|
| Make |
Model |
| Nextel |
BlackBerry 7510 |
| RIM |
BlackBerry 6210 |
| RIM |
BlackBerry 6230 |
| RIM |
BlackBerry 6280 |
| RIM |
BlackBerry 6510 |
| RIM |
BlackBerry 7210 |
| RIM |
BlackBerry 7230 |
| RIM |
BlackBerry 7250 |
| RIM |
BlackBerry 7280 |
| RIM |
BlackBerry 7290 |
| RIM |
BlackBerry 7510 |
|
|
|
Shopping Cart Summary
You Just Added ():
-
Total Qty: @
Total: USD $
Items in Your Cart:
Cart Subotal: USD $ Close
|
 + '&width=480&height=480&pageid=8647', 'imagepopup', 480, 480);)
;)
;)
;)
